This is my USB Hi-Pro. There are many like it, but this one is mine. My Hi-Pro is my best friend. It is my life. I must master it as I must master my life. My Hi-Pro, without me, is useless. Without my Hi-Pro, I am useless.
Cable to connect USB HI-Pro to your PC
Phonak hearing aids use special cables (CS44a, not the standard CS44 cables) because Phonak has pins 3&4 switched for some obscure reason. I used the standard CS44 cable with this special >> DIY converter <<.
Standard CS44 Programming Cable (shown below, same as Oticon Programming Cable #3)
Closeup of CS44 Programming Cable
Using DIY Phonak cable converters connected between the Hi-Pro and standard CS44 cables.
If you have Phonak CS44a cables (instead of standard CS44 cables) then don’t use the DIY converters.
The programming cable just plugs directly into the Phonak Audeo Yes.
Cool. Thanks for the info.
I’m considering getting a Phonak Audeo Q90 that’s been offered to me for super cheap. They were used for 2 hours, then the original owner (friend of mine) got something different from the VA. I wouldn’t mind having a backup set, and something that can help with my tinnitus…